Pools
Showing 1–18 of 28 results
-
THE BIG SIX
Read moreParamount Pools are a low cost Do-It-Yourself swimming pool that are proudly manufactured in New Zealand. Originally known as the Para Pool and Clark Pool, our swimming pools have long been a feature in kiwi backyards. Generations of children have learned to swim in Paramount Pools, and over the last 40 years thousands of families have decided to to make an investment that is better than a beach in your own backyard!
Our Big Six swimming pools can be installed either in-ground or above-ground and are designed for a decked or tiled finish.
Read more -
THE LIDO
Read moreParamount Pools are a low cost Do-It-Yourself swimming pool that are proudly manufactured in New Zealand. Originally known as the Para Pool and Clark Pool, our swimming pools have long been a feature in kiwi backyards. Generations of children have learned to swim in Paramount Pools, and over the last 40 years thousands of families have decided to to make an investment that is better than a beach in your own backyard!
Our Lido swimming pools can be installed either in-ground or above-ground and are designed for a decked or tiled finish.
Read more -
10M Frame Pack
$726.00Add to cartPart Number: PART1540
10M MultiFrame Packs are used in the construction of Lido Paramount Pools, and contain all the required steel for two vertical bracings. i.e, each pack will construct two of the following:
Add to cart -
Base Channel Nut & Bolt Set
$3.85Add to cartPart Number: PART1579
Used to connect Base Channels to the Stirrup Connector, The Diagonal Brace and the Diagonal Brace to the Deluxe Vertical.
4x Sets required for each Base Channel / Deluxe Vertical Assembly. Each should be installed with a Spacer.
Each set contains:
1x M10 x 90 Bolt Zinc
1x M10 Washer Zinc
1x M10 Nut ZincAdd to cart -
Base Channels
$71.79Add to cartPart Number: PART1556
Base Channels are used on oval Paramount Pools (both models) as a part of vertical / diagonal bracing assembly. They connect the Pressure Plates with the Verticals and Diagonals.
Made in New Zealand from high quality steel.
Add to cart -
Big Six Seat
$76.25Add to cartPart Number: PART1552
The large Big Six seat gives a excellent finish to our Big Six Swimming Pools. Made from steel in NZ and powder coated white. Features a hexagonal / honeycomb pattern on the top.
Add to cart -
Connector Plate
$12.45Add to cartPart Number: PART1551
Used on both Big Six and Lido Paramount Pools, connector plates fit to the top and bottom of each Deluxe Vertical.
Made from Steel in New Zealand.Add to cart -
Deluxe / Big Six Vertical
$76.25Add to cartDeluxe / Big Six Vertical
Part Number: PART1554
The Deluxe Vertical, also known as the Big Six Vertical is used on both Lido and Big Six Paramount Pools. On Lido Pools the Deluxe Vertical is used only in the Vertical / Diagonal Brace Assembly. On Big Six Swimming Pools, the Deluxe Vertical is used on every Connector Plate fitting.
Add to cart -
Diagonal Brace
$62.00Add to cartPart Number: PART1555
The Diagonal Brace is used on every oval Paramount Pool (of both models) to structurally brace the main verticals on the two longest sides. They connect to the Deluxe Verticals and the Base Channel.
Made from Steel in New Zealand. Powder coated white.
Add to cart -
DPD Tablets and Reagents
from: $2.50Select optionsPart Number: Assorted
We carry an assortment of DPD tablets and reagents for manual test kits.
DPD #1 Tests Free Available Chlorine (10 Tablets)
DPD #3 Tests Total Chlorine (10 Tablets)
DPD Phenol Red Tests pH (10 Tablets)
Solution #2 pH (40mL)
Solution #3 Acid Demand & Total Alk (30mL)
Solution #4 Neutraliser (20mL)
Solution #5 Total Alkalinity (15mL)Select options -
Ground Covers
from: $55.35Select optionsPart Number: Assorted
Ground covers are a protective layer installed between the compressed sand base and the pool liner on Paramount Pools.
Select options -
Gutter Bolt Set
$2.00Add to cartPart Number: PART1318
This set contains:
1x 1/2″ x 1/4″ Slot Headed Bolt Zinc Plated
1 x 1/4″ Nut Zinc Plated
2x 1/4″ Washers Zinc PlatedUsed when bolting together a wall or patching a Paramount Pool Wall. Each wall join (1.2m vertical) required 48x Sets to meet the design specification.
Once secure, you should cover these with a Bolt Cover Strip to protect the liner.Note: Price is for each set (two sets are shown in the picture for illustration purposes).
Add to cart -
Lido Vertical
$53.25Add to cartPart Number: PART1431
These Lido Verticals are used on Oval and Round Lido Pools inbetween each rail – except for the bracing verticals (which have a diagonal brace on them).
Add to cart -
Liner Material Per M
$62.35Select optionsPart Number: LINR1631A
Replacement liner material. Available in either light blue or dark blue.
Comes 1.2m by 1m. Ie, if you order 2m you will get 1.2m x 2m.Note:
Colours shown by your monitor may vary slightly to the real world. Additionally, your liner may have faded over years in the sun.Select options -
Liner Repair Glue
$9.45Add to cartPart Number: LINR1628
Bostick Clear Bond 50mL, perfect for gluing liner material together.
Note: Liner Material must be clean and dry. For underwater repairs try a Boxer Underwater Repair Kit.
Add to cart -
Liner Underwater Repair Kit
from: $17.74Select optionsPart Number: LINR1630 / A
Perfect for repairing any small liner holes under the water line without draining your pool. Comes with an underwater glue and a clear patch. Available in two sizes.
Notes:
- Small comes with 15mL of Glue and a 152mm x 92mm Patch.
- Large comes with 30L of Glue and a 305mm x 92mm Patch.
Select options -
No. 25-36 Frame Pack
$841.00Add to cartPart Number: PART1510
No. 25-36 Frame Packs are used in the construction of Big Six Paramount Pools, and contain all the required steel for two vertical bracings. i.e, each pack will construct two of the following: Additionally, they also contain Big Six Seats and Cover Plates.
Add to cart -
No.7 Frame Pack
$375.00Add to cartPart Number: PART1520
No.7 Frame Packs are used in Paramount Pools Big Six swimming pools.
Add to cart
